An important requirement of virtually all military environmental programs, solar radiation testing simulates the deteriorating thermal and physical effects of UV sunlight on products and materials. By measuring how equipment changes during exposure, we help you make better, more durable products, no matter what the conditions.

A key component in MIL-STD-810 and DEF STAN 00-035, solar radiation tests two major effects of exposure to sunlight: thermal response and photochemical deterioration. Because the heat and aging effects of UV radiation can cause significant changes in plastic and non-metallic materials, testing is critical to avoiding outgassing and overheating, discoloration and deterioration, and loss of structural rigidity. 

Working with Element

Because most specifications only call for one solar radiation test, deciding which method is best can be challenging. We help you understand the benefits of each test, and can assist in choosing the one that will best suit your needs. Our accredited test methods give you the data you need to make decisions about product design, development and material selection, so you can be confident in the safety and performance of your equipment.

For more information about solar radiation testing, or to request a quote, contact us today.

Solar Radiation Testing Services

Solar radiation testing

Cyclic Exposure

Described in MIL-STD-810 Section 505, Part 1, cyclic exposure testing mimics the natural cycles of sunlight, providing an accurate simulation of how materials will react in real-life situations.  

Because cyclic exposure better simulates how sunlight changes over the course of the day, this method is generally used to determine how increased temperature will affect a product.
This procedure uses constant temperature monitoring to determine the peak internal and external temperatures of a product, find the point of failure, and establish acceptable working temperatures for products and materials.

solar radiation testing

Steady-State Exposure

Outlined in MIL-STD-810 Section 505 Part 2, steady-state exposure testing applied a constant, consistent rate of UV exposure to materials to determine how long it takes for discoloration and deterioration to occur.

Unlike cyclic exposure testing, steady-state exposure uses the same level of radiation over a pre-determined period of time to find out how many hours of exposure it takes to cause varying degrees of peeling, yellowing, material deterioration and structural change. It can also be used to measure outgassing, a potentially harmful release of vapors that occurs when plastics exceed certain temperatures.
Because this is a more accelerated method, it is also used for long-term projects where cyclic exposure would require significantly more time and cost to test.

How Can We Help You Today?

+1 888 786 7555 Contact Us
More details

Other Product Qualification Testing Services

Accelerated Aging Accelerated Weathering Testing Acceleration Testing Advisory Services Aircraft Ditching Testing Altitude Testing and Simulation Bespoke Fire Testing Bird Strike Testing Breath Alcohol Ignition Interlock Device Component High Cycle Fatigue Testing Cone Calorimetry Doors and Windows Testing Dynamics Testing Electromagnetic Compatibility (EMC) Testing Electronics Test Methods Environmental Stress Screening (ESS) Test Environmental Testing Explosive Atmosphere Testing and Certification External Cladding Fire Resistance Flame Fire and Flammability Testing Fluid Susceptibility Testing
Fuel System Testing Hail Impact Testing HALT Testing and HASS Testing Hardware Testing High Cycle Fatigue Testing High Level Acoustic Noise Testing Highly Accelerated Stress Testing Hose Testing Humidity Testing Hybrid and Electric Vehicle Battery Testing Ingress Protection Testing International Certifications and Approvals Liquids and Fuels Testing Low Lubricity Aircraft Fuel Testing Marine Fire Testing MIL-STD-810 Testing Plastic Pipes Testing Pneumatics Testing Pressure Testing Product Assessment Reports Product Certification Services Product Compliance Services
Product Safety Testing Radiant Panel Testing Rail Fire Testing Reaction to Fire RTCA DO-160 Testing Salt Fog and Salt Spray Testing Sand and Dust Testing Seismic Testing Shock Testing Space Simulation Spin Testing Steiner Tunnel Testing Structures Testing Temperature and Thermal Testing Thermal Vacuum Testing Towing Trailer and Hitch Product Testing Vibration Testing VOC and SVOC Testing Water Mist Systems Wireless Radio Testing Zigbee Certification Services
making certain for nearly 190 years

Related Services

Environmental testing

Environmental Testing

Element can provide you with critically important data on your product or part's performance in response to typical or extreme environmental stresses and conditions. 

Read more
Other Coating Services 640 x 480

Coatings Testing

We offer world-class materials expertise in polymers, elastomers, thermoplastics, composites, and structural adhesives. With a global reach of coatings laboratories in the UK, USA, Europe, and Asia, Element provides a comprehensive range of coatings testing services to the Energy, Aerospace, Defense, and Transportation sectors. 

Read more
Alternative salt spray 640 x 480

ASTM G154 and ASTM G155 Explained

Learn about ASTM G154 and ASTM G155 and how they empower manufacturers to design products that can withstand exposure to sunlight and moisture. 

Read More
Element Global Laboratories

Element Locations

Learn more about our laboratories - where they are located; the unique capabilities they have and how they can help you solve your technical and commercial challenges.

FIND A LABORATORY

Our team of over 9,000 Engaged Experts in North America, Europe, The Middle East, Australia, Asia and Africa are ready to help you.

Make an inquiry today